开创云全域建站

全国服务热线:
400-6680-699

联系我们

山东省日新石化有限公司

电话:0531-87581002 0531-87580668

手机:15853115707

传真:0531-87582431

联系人:李经理

地址:济南市南外环路西首



ANDEROL FGC 46/100

更新时间:2017-06-19 点击数:2604

ANDEROL FGC 46/100

ANDEROL FGC 系列是满足USDA H1级的所有要求,可以用于偶尔接触食品的


合成烃类 (PAO)食品级压缩机油。 其特别添加剂提供优良的热稳定性和氧化稳定


性来保证空压机部件的清洁。ANDEROL FGC 系列在国际NSF 认证为H1级,


该产品同时通过犹太食品和伊斯兰教食品的认证。


The ANDEROL FGC Series are synthetic hydrocarbon (PAO) based food


machinery compressor lubricants meeting the former USDA H1 requirements


and can be used where incidental food contact may occur. The formulations


contain special additives that impart good thermal and oxidative stability to


keep compressor components clean. The ANDEROL FGC Series is


registered H1with NSF International. The products have been certified as


Kosher by the Orthodox Union and Halal by INFANCA.


ANDEROL 食品级润滑剂达到了美国食品和药品管理局 FDA CFR 21 178.3570条款


的全部规定。ANDEROL Food Machinery Lubricants meet the requirements of


the FDA regulation 21 CFR 178.3570.


应用 APPLICATIONS


根据不同黏度,推荐用于压缩出口气体中所含润滑油可能偶尔与食品直接接触的


旋转螺杆式和往复式压缩机。


Recommended for use in rotary-screw or reciprocating compressors,


depending on ISO grade, in applications where incidental food contact


may occur with oil in the discharge air.


依照应用场合和黏度,额定操作温度范围 是 -35℃ 到 175℃。


Nominal Operating Range is -35℃ to 175℃, depending on application


and ISO grade.


优点 ADVANTAGES


þ  换油次数更少Fewer oil changes


þ   减少漆膜和沉积物生成Reduced varnish lacquering and deposits


þ   减少压缩机维修量Reduced compressor maintenance


þ   优异的耐磨性能Excellent anti-wear properties


þ   防锈和抗氧化Rust and oxidation inhibited


þ   耗油量更少Lower oil consumption


þ   使用寿命长,不出现结胶和变色Long life without gumming or discolouring


þ   由合成烃类基础油配制Formulated from synthetic hydrocarbon oil


þ   大大地减少了火灾和爆炸的危险


Greatly reduced fire and explosion hazard


相容性 COMPATIBILITY


ANDEROL 合成烃类润滑剂和矿物油类润滑剂在与油漆、密封件、垫片和软管


间的相容性方面类似。当把矿物油类润滑剂切换成ANDEROL合成烃基润滑剂


时,在相容性方面没有特别的注意事项。


ANDEROL synthetic hydrocarbon based lubricants are similar to mineral oils in


their compatibility with paints, seals,gaskets and hoses.No special


precautions related to compatibility are required when changing over from a


mineral oil ubricant to an ANDEROL synthetic hydrocarbon based lubricant.